Skip to main content

Universal solvent restructuring induced by colloidal nanoparticles

26-01-2015

Colloidal nanoparticles are widely used in dispersed form for consumer and industrial goods. However, little is known about the chemical environment near the particle surface. Using high-energy X-ray scattering at the ESRF, it has now been shown that nanoparticles subtly influence the local solvent density. Each nanoparticle induces a nanoscopic solvation shell, reaching out as far as 2 nm from the particle surface. This effect is expected to strongly influence the chemistry and rheology of these important materials.

  • Share

The properties of matter at the nanoscale can differ wildly from that of bulk materials. For example, pronounced increases in chemical reactivity, or changes in optical properties are commonplace. In recent years, nanoparticles with a typical size of 1-100 nm have therefore been used in a wide diversity of applications, for which one common theme can be identified. The nanoparticles are embedded in a matrix that leaves the maximum surface area exposed, and maintains a high degree of dispersion. In many real world applications, for example in sun screen, a liquid or gel carrier is used for this purpose. To prevent agglomeration and so prolong the lifetime of the product, it is important to know how the solvent interacts with the nanoparticles. Likewise, in homogeneous catalysis, where chemical reactions occur at the particle surface, it is important to know whether the local chemical environment is different from that of the bulk solvent.

The reorganisation of solvent molecules around isolated cations has been recognised for many years [1]. Pioneering experiments with synchrotron radiation have shown how bulk planar surfaces can induce surface ordering in fluids [2]. However, no definitive proof previously existed for the formation of a nanoscale solvation shell around colloidal nanoparticles. Nevertheless, such effects have been reported in simulations of solvated nanoparticles [3].  In real systems, this would influence properties including diffusion coefficients and particle growth, which influence the applications described above.

This question has been addressed experimentally using high-energy X-ray scattering at beamline ID15B, in particular using the pair distribution function (PDF) technique. This technique makes use of area detectors to collect scattering data up to a very high resolution in reciprocal space. Fourier transformation then yields the PDF, which is a histogram of all the interatomic distances in the material. Well-defined species, like the ZnO nanoparticles studied here, yield sharp peaks whereas the isotropic density variations found in liquids at medium distances are reflected in a damped oscillation reflecting the average molecular correlations.
 

Fit to the PDF of redispersed ZnO nanoparticles with citrate ligands in propanol.

Figure 1. Fit to the PDF of redispersed ZnO nanoparticles with citrate ligands in propanol. Experimental PDF of ZnO nanoparticles (black) and their fit (red), showing the overall difference of the fit (grey), the contribution of the nanoparticle (green), and the contribution and fit of the restructured solvent (blue) in offset for means of clarity. The contribution of the restructured solvent (blue) is the difference-PDF of the experimental, background-corrected PDF (black) and the nanoparticles (green).

We discovered that the PDF of dry nanoparticles could be well explained by a simple crystal structure model. However, when the nanoparticles were dispersed in a range of solvents, an additional signal appeared. This takes the form of a damped oscillation like that seen in the bulk solvent (Figure 1). However, it is out of phase and cannot be subtracted as a background contribution. After exhaustive experiments, we were able to show that this signal does not depend strongly on particle size, shape, nor the capping agent used. However, a linear trend in the position of the oscillation is found with alkyl chain length in the series methanol-ethanol-propanol (Figure 2). Supplementary measurement on metallic, polar and non-polar oxides showed that the formation of a solvation shell is apparently universal for colloidal nanoparticles.
 

Comparison of short-range order in restructured and bulk solvents.

Figure 2. Comparison of short-range order in restructured and bulk solvents. a) PDF of pure bulk propanol (black) and difference PDFs of restructured propanol around ZnO nanoparticles with ligand acetate (red), citrate (blue), dimethyl L-tartrate (green), and 1,5-diphenyl-1,3,5-pentanetrione (yellow).The amplitudes of the difference-PDFs are scaled with respect to the contribution of ZnO nanoparticles to the data. b) Maxima positions of difference-PDFs of the redispersed ZnO nanoparticles in all solvents plotted over the chain length of the solvent molecules.The positions follow the trend of the pure solvents (black stars), yet the difference-PDF positions are distinctly offset with respect to the error bars that resulted from least-squares fits.

The signal is extremely weak, reflecting both the very low solubility of our nanoparticles (ca. 30-40 millimolar in ethanol), and the proportion of solvent in proximity to the particles. However, we were able to parameterise it using a simple model. The fitting shows that solvent restructuring extends as far as 2 nm into the bulk solvent. Due to the shift of the signal with alkyl chain length, it is likely that the alcohol molecules arrange perpendicular to the surface (Figure 3). Profound changes in the chemical properties of the solvent in this region are thus supported by our analysis.

Enhanced short-range order of solvent molecules at ZnO nanoparticle surfaces.

Figure 3. Enhanced short-range order of solvent molecules at ZnO nanoparticle surfaces. The ethanol molecules (hydrogen atoms omitted) form hydrogen bonds with surface hydroxyl groups and citrate molecules. The surface coverage of these groups is reduced for clarity. The enhanced short-range order extends a few molecular layers into the bulk liquid before bulk properties are recovered. In bulk ethanol, molecules do not arrange in pairs, but form winding-chains or hexamers (2–4), and the enhanced short-range order around the nanoparticles is not as crystalline as suggested in the scheme, which serves as a simplified illustrative representation.

In summary, we have been able to detect the formation of a nanoscopic solvation shell around colloidal nanoparticles using high energy X-rays. Although the tiny solvent density changes reported here are at the very limit of detectability, when the ESRF phase two lattice upgrade is complete, we will be able to detect changes in nanoparticle size, shape and chemistry, as well as the influence of the solvation shell in real time. This will open the door to a complete understanding of the chemical and rheological properties of solvated colloidal nanoparticles.

 

Principal publication and authors
Universal solvent restructuring induced by colloidal nanoparticles, M. Zobel (a), R.B. Neder (a), S.A.J. Kimber (b), Science 347, 292-294 (2015).
(a) Department of Physics, Lehrstuhl für Kristallographie und Strukturphysics, Friedrich-Alexander University Erlangen-Nürnberg, Erlangen (Germany)
(b) ESRF

 

References
[1] D.T. Bowron, S. Diaz-Moreno, J. Phys. Chem. B, 113, 11858 (2009).
[2] O.M. Magnussen, Phys. Rev. Lett., 74, 4444 (1995).
[3] D. Spagnoli, J.P. Allen, S.C. Parker, Langmuir, 27, 1821 (2001).

 

Top image: Short-range order of solvent molecules at a nanoparticle's surface.